AA.III.C — Glassy Water Takeoff and Climb (ASES, AMES)

Objective: To determine that the applicant exhibits satisfactory knowledge, risk management, and skills associated with glassy water takeoff and climb.

Knowledge

The applicant demonstrates understanding of:

• AA.III.C.K1Effects of atmospheric conditions, including wind, on takeoff and climb performance.
• AA.III.C.K2Appropriate power settings and V-speeds for takeoff and climb.
• AA.III.C.K3Appropriate airplane configuration.
• AA.III.C.K4Appropriate use of glassy water takeoff and climb technique.

Skills

The applicant demonstrates the ability to:

• AA.III.C.S1Coordinate with the crew, if applicable, and complete the appropriate checklist(s) prior to takeoff in a timely manner.
• AA.III.C.S2Make radio calls as appropriate.
• AA.III.C.S3Position the flight controls for the existing conditions.
• AA.III.C.S4Verify the airplane is configured for takeoff.
• AA.III.C.S5Clear the area; select appropriate takeoff path considering surface conditions and collision hazards.
• AA.III.C.S6Retract the water rudders, as appropriate.
• AA.III.C.S7Set and confirm takeoff power.
• AA.III.C.S8Avoid excessive water spray on the propeller(s).
• AA.III.C.S9Maintain directional control throughout takeoff and climb.
• AA.III.C.S10Establish and maintain an appropriate planing attitude, directional control, and correct for porpoising, skipping, and increase in water drag.
• AA.III.C.S11Utilize appropriate techniques to lift seaplane from the water considering the glassy water surface conditions.
• AA.III.C.S12Adjust power, as appropriate, and establish a pitch attitude to maintain the appropriate climb airspeed/V-speed, ±5 knots for each climb segment.
• AA.III.C.S13Retract flaps after a positive rate of climb has been verified or in accordance with manufacturer or operator procedures and limitations, as appropriate.
• AA.III.C.S14Follow noise abatement procedures, as practicable.